Imagene Isoflow Dispenser 3 Pump Model

DESCRIPTION:

The Imagene Isoflow Dispenser is an ever more popular choice for lateral flow diagnostic kit manufacturers, looking for a high throughput, reliable, simple, inexpensive and efficient bench top dispenser. Capable of dispensing over fifty thousand tests worth of liquid reagents daily, and with a reverse priming function for the lowest dead volume, this dispenser is perfect for R&D through to medium volume production applications.

KEY FEATURES:

• Easy to use, menu and control system
• High capacity production throughput
• Easy and inexpensive to maintain
• Completely adjustable dispensing volumes
• Computer controlled pumps for precision dispensing
• Flexible contact needles for the tightest possible line quality
• Negative pressure table to prevent card movement
• Atomizer nozzle included for gold conjugate dispensing
• Minimum 5mm line spacing with stock unit, sub 3mm line spacing available with custom parts
• Available in 1 to 8 pump applications

Dispensing Nozzles Control and Test Line

SPECIFICATIONS:

• Power Supply: 110 - 220 V Automatic Adjustment
• Dispense onto membranes, up to 500 mm (20 in) long and 120 mm (5 in) wide
• Carriage speed set digitally from 10 to 300 mm/sec
• Dispense rate set digitally from 0.01 to 10 µl/mm
• Dispense 1 to 8 different reagents simultaneously
• Each reagent dispensed is controlled independently
• Completely digital operation. No micrometers or pressure
  regulators required.
• Minimum spacing between nozzles is 5 mm (standard),
  2.5 mm with custom designs.
• Internal vacuum source to hold down membrane
  (No external air or vacuum required)
• Low dead volume - approximately 100 µl, of which
  60 µl can be recovered when dispensing complete
• Small foot print (Width: 13 in/33 cm; Length: 26 in/66 cm)
  and light weight (Weight: 29 lbs/13 kg)
• Power Supply: 100-240VAC 50/60Hz, 150 watts